Library: 1212 - NTCIP Objects for Network Camera Operation

Document Number: Document Type: Former Doc. Number: Document Status: Published:
1212 Device Data Dictionary none Working Group Draft
Developed By: Closed Circuit Television Working Group
Point of Contact: Michael Forbis, P.E., Washington State Department of Transportation
Published: This document is not yet published.
Description of Document:
This NTCIP data dictionary defines the management information base for roadside frame capture digital image cameras throught parameters that represent the configuration, status, and control information.

Document Status:

Date submitted: 12/6/2006

In 2002 -- The Joint Committee on the NTCIP approved a proposed Work Item to develop "Object Definitions for Network Camera Operation." The standard will specify objects for digital, still frame CCTV image capture and transmission.

April 2003 -- NTCIP 1212 document number assigned.

A draft is not yet available for public download.

June 2005 - NEMA staff is reallocating consultant hours. Work is expected to resume by the third quarter of 2005.

September 2006 - After work resumed, it became evident there was insufficient hours available to complete the standard. A proposal for FY2007 funding to complete NTCIP 1212 was declined by the FHWA. Therefore, work has been suspended at this time.

###

NTCIP documents are distributed in Adobe® Acrobat® format. Version 9 of the Acrobat Reader® is recommended. To get Adobe® Acrobat Reader®, click here.


Return to NTCIP home page This site last updated August 24, 2010
© 1997-2010 AASHTO, ITE, NEMA. Portions © 1997-2010 Weblynx®.
NTCIP is a Trademark of AASHTO, ITE, NEMA.

This site was developed by Weblynx Corporation under contract with the National Electrical Manufacturers Association.
Information contained within this site may not be reproduced without written approval of
RITA ITS JPO and/or AASHTO and/or ITE and/or NEMA and/or Weblynx.